Home > News > How to use gypsum foaming agent conveniently?

How to use gypsum foaming agent conveniently?

wallpapers News 2021-05-25
Introduction of gypsum foaming agent
Gypsum board foaming agent is prepared by anionic surfactant and foam stabilizer. After being diluted several times with water, the foaming agent is used to make rich and dense foam, which is mixed with gypsum slurry to make gypsum board.
Gypsum board foaming agent is used for gypsum foaming in the production process of gypsum board. When the foaming agent and gypsum are hydrated, an intermolecular force hydrogen chain is generated, resulting in steric hindrance, resulting in a lack of gypsum lattice structure, stimulating gypsum activity, and accelerating the formation of network gypsum skeleton, thereby enhancing the strength of gypsum board and reducing The capacity of gypsum board can greatly save raw materials and fully improve the physical properties of gypsum board.
Formation of Gypsum Board Blowing Agent
Gypsum board foaming agent is prepared by anionic surfactant and foam stabilizer. After being diluted several times with water, the foaming agent is used to make rich and dense foam, which is mixed with gypsum slurry to make gypsum board.

Product performance of gypsum foaming agent
1. High foaming rate.
2. The foam pore size is uniform and stable.
3. Good combination with gypsum.
4. It is harmless to the human body and does not pollute the environment;
5. It has a certain blocking effect on gypsum.

Application of gypsum foaming agent
Suitable for gypsum-based wallboard, self-leveling gypsum, gypsum products, etc.
Tips for using foaming agents
Since the tubular foaming agent will be sprayed out directly when it is used, we must control its speed when using it. If it is just filled, we need to shake the scenery up and down before spraying it on the place where construction is needed. Then apply cement mortar or other paint on the outer layer to balance it.
If you want to know more about foam concrete additives, please click on the following link:
Is polycarboxylic acid water reducing agent also widely used?
CLC block foam stabilizer can effectively reduce the phenomenon of collapse

Say something
  • All comments(0)
    No comment yet. Please say something!